EZ-gate - pickup truck bed rack and tailgate replacement installation instructions

EZ-Gate pickup truck tailgate replacement and truck bed equipment rack

Install Your EZ-Gate Pickup Truck Bed Rack

Installation of the EZ-Gate is quick and easy, but it is important to follow the directions carefully to insure proper and safe performance.

The assembled EZ-Gate weighs about 25 pounds and is easy to handle. Please use proper lifting posture while maneuvering the EZ-Gate into place.

Complete installation instructions and warranty information are also included with your EZ-Gate.

rack assembly

Figure #2

#1. Place pad under rail against side of bed.

#2. Turn bottom sleeve clockwise until snug fit in bed.

#3. Turn end sleeve clockwise until snug fit.

#4. Turn bottom sleeve clockwise until snug fit in bed.
(make sure gate is square with bed for best results.)

Repeat steps #2 through #4 until a firm contact is made.

#5 - Turn end sleeve as tight as needed to put padlock into hole nearest to sleeve.
(Please check gate for pressure on legs often for best results.)

A.C.R. Machining, Inc
206 Oak St. • Salida • CO• 81021
1-800-962-6002 • alberto@qwestoffice.net